Coping Saw Blades

Coping Saw Blades are 6-1/2in. long between pins to fit all standard frames. For precise sawing of wood, plastic, copper and other soft metals. Made from the finest hardened and tempered spring or high carbon steel with precision punched or milled teeth for accurate sawing, smooth finishes and long life.

Showing all 7 results

  • Professional Grade Coping Saw

    Professional Grade Coping Saw SF63510

    $13.52

    Coping Saw with Unique Blade Tensioning End Screw is a sturdy, professional saw that allows standard pin end coping saw blades to be tensioned at both ends (using the handle and thumb screw) for more precise cutting of intricate and irregular shapes with complete control! Blades can be turned 360º to saw in any direction – push or pull stroke. Depth of cut is 4-3/4in. Hardwood handle. Equipped with Olson’s 15 TPI blade. Here is what an expert says about this saw: About Coping Saws
    What I like about coping saws is that they cut faster. I use an 18 tpi blade… (I think they’re made by Olson.) The blades cut wicked fast thanks to their deeper gullets. It takes me 12 to 14 strokes to remove the waste between dovetails… The other thing I like about the coping saw is that its throat is deeper (5″ vs. 2-3/4″ on the fret saw), which allows me to handle some drawers without turning the blade. Also, the blades are far more robust and almost never come loose. After the last couple weeks of constant dovetailing (hence all the dovetail posts – sorry about that), I think I’m going to put my fret saw away for a while. In other words, I’m going to stop fretting and just cope (sorry about that as well). — Christopher Schwarz, Editor Woodworking Magazine

  • 35-670 Zona Coping Saw

    35-670 Zona Coping Saw

    $11.50

    Flat wire frame for tensioning standard pin end coping saw blades. Precise cuts in wood, plastic and metal. 12″ overall length. 6-1/4″ depth of cut. Blades can be turned 360º to saw in any direction. Comes with 6-1/2″ long, 15 TPI blade.

  • Zona coping 400x368 - Coping Saw Blades 6-1/2" Long 4-packs  Coping Saw Blades 6-1/2" Long 4-packs - coping-blades-and-saws, coping-jewelers-mini-hack-blades-saws, coping-jewelers-mini-hack-saw-frames-and-blades, coping-saws-saw-blades

    Coping Saw Blades 6-1/2″ Long 4-packs

    $2.37$5.40

    4-packs of Coping Saw Blades 6-1/2in. long between pins to fit all standard frames. For precise sawing of wood, plastic, copper and other soft metals. Made from the finest hardened and tempered spring or high carbon steel with precision punched or milled teeth for accurate sawing, smooth finishes and long life.

    • SKUs Available:
    • 36-678 15TPI – medium
    • 36-679 32TPI – cuts metal
    • 36-676 24TPI – extra-fine
  • 4-packs Coping Saw Blades 6-1/2in. long

    Coping Saw Blades 6-1/2″ Long 4-packs

    $2.28$5.20

    4-packs and Assortment Pack Coping Saw Blades 6-1/2in. long between pins to fit all standard frames. For precise sawing of wood, plastic, copper and other soft metals. Made from the finest hardened and tempered spring or high carbon steel with precision punched or milled teeth for accurate sawing, smooth finishes and long life.

  • 12-packs Coping Saw Blades 6-1/2in. long

    12-packs Coping Saw Blades 6-1/2″ Long

    $5.62$11.96

    12 per pack Coping Saw Blades 6-1/2in. long between pins to fit all standard frames. For precise sawing of wood, plastic, copper and other soft metals. Made from the finest hardened and tempered spring or high carbon steel with precision punched or milled teeth for accurate sawing, smooth finishes and long life.

    • SKUs available:
    • CP301DZ – 16TPI skip – fine
    •  CP302DZ – 18TPI – fine
    •  CP303DZ – 20TPI – fine
    •  CP304DZ – 15TPI – medium
    •  CP306DZ – 10TPI – coarse
    •  CP307DZ – 32TPI – cuts metal
    •  CP308DZ – 24TPI – extra-fine
  • 144-Pack Coping Saw Blades

    144-Pack Coping Saw Blades

    $53.46$119.50

    Bulk packaged 144 same sku blades per pack. Coping Saw Blades are 6-1/2in. long between pins to fit all standard frames. For precise sawing of wood, plastic, copper and other soft metals. Made from the finest hardened and tempered spring or high carbon steel with precision punched or milled teeth for accurate sawing, smooth finishes and long life. CP307GR for cutting metal is $119.50 per 144-pack. All other bulk packs are $53.46.

    • SKUs Available:
    • CP301GR 16TPI skip fine
    • CP302GR 18TPI – fine
    • CP303GR 20TPI – fine
    • CP304GR 15TPI – medium
    • CP306GR 10TPI – coarse
    • CP307GR 32TPI – cuts metal
    • CP308GR 24TPI – extra-fine
  • Saw Blade Lubricant Stick

    Saw Blade Lubricant Stick – AC70010

    $7.62

    8″ long x 1″ diameter. Prolongs blade life and produces smoother and quicker cuts. Specially compounded to keep metal, plastic, and wood cutting blades from clogging with wood chips or pitch. Use on all power and hand held cutting tools including band, scroll, circular, hack and jewelers saw blades. View or download SDS/MSDS sheet on this product.

     

Orders will not be processed between Dec. 12-14 due to Inventory. Monday Dec. 17 order processing will resume. We apologize for the inconvenience. Dismiss

string(4) "grid"