Jeweler's Blades and Saws

Jewelers Saws can use scroll, fret or jewelers blades of any size. Frame adjusts to extend the life of broken blades. Cuts all types of metal and plastic. Jewelers blades have finer teeth or more Teeth Per Inch TPI – which is prefered for cutting metal. These saws can also be used with Plain End ScrollSanders and Plain End Scroll Saw Files.

Showing all 9 results

  • 36 542 400x390 - 36-542  Jewelers Saw Files  36-542  Jewelers Saw Files - new-scrollsanders, needle-files-and-spoke-shave, pin-vises-and-miniature-twist-drills, jeweler-s-blades-and-saws

    36-542 Jewelers Saw Files

    $5.52

    5-1⁄4″ long x .156″ wide x .056″ thick, files sand, smooth and shape intricate, small areas of hard or soft wood, plaster, ceramics, soapstone, copper, brass and other non-ferrous metals. Made from durable, tempered spring steel core coated with silicon carbide abrasive, they fit the Adjustable Jewelers Saws including Zona’s 35-750 saw, most scroll saws that take 5″ Plain End blades, pin vises, craft knife handles and hand fret saws. MADE IN USA.

  • qtr inPlainEnd 400x505 - Plain End 1/4" wide 4-Packs<br>ScrollSanders  Plain End 1/4" wide 4-Packs<br>ScrollSanders - new-scrollsanders, jeweler-s-blades-and-saws

    Plain End 1/4″ wide 4-Packs
    ScrollSanders

    $7.80

    Available in 3 different grits. Read recommendations below to make the best selection for your scroll saw.
    Can also be used in a Jeweler’s Saw Frame! 

  • halfin PlainEnd 400x578 - Plain End 1/2" wide 4-Packs<br>ScrollSanders  Plain End 1/2" wide 4-Packs<br>ScrollSanders - new-scrollsanders, jeweler-s-blades-and-saws

    Plain End 1/2″ wide 4-Packs
    ScrollSanders

    $7.80

    Available in 4 different grits. Read recommendations below to make the best selection for your scroll saw.
    Can also be used in a Jeweler’s Saw Frame! 

  • Jewelers Saw 5in. cutting depth

    Jewelers Saw 5″ cutting depth – SF63525

    $23.92

    Jewelers Saw with blade tensioning end screw and frame adjustment. Holds plain end blades 2-1/2in. to 6in. long! Every frame has the quality craftspeople demand for close, accurate sawing.

  • Jewelers Saw 3in. cutting depth

    Jewelers Saw 3in. cutting depth SF63523

    $21.84

    Jewelers Saw with blade tensioning end screw and frame adjustment. Holds plain end blades 2-1/2in. to 6in. long! Every frame has the quality features craftsmen demand for close, accurate sawing.

  • Zona Jewelers Saw -  2-7/8" cutting depth

    Zona Jewelers Saw – 2-7/8″ cutting depth

    $16.20

    Zona Jeweler’s Saw has 2-7/8″ cutting depth. Uses scroll, fret or jewelers blades of any size. Frame adjusts to extend the life of broken blades. Cuts all types of metal and plastic. Steel frame with chrome finish. 11-1/4″ overall length. Comes with 5″ long, 38 TPI blade. Can also hold Scroll Sanders!

  • Jewelersblades 400x301 - 5" Metal Piercing Jewelers Saw Blades  5" Metal Piercing Jewelers Saw Blades - jeweler-s-blades-and-saws, jewelers-saw-jeweler-saws, coping-jewelers-mini-hack-saw-frames-and-blades

    5″ Metal Piercing Jewelers Saw Blades

    $6.90

    12-packs of 5in. long premium quality Metal Piercing Jewelers Saw Blades have extremely fine teeth. Made of hardened and tempered steel for sawing metal and other hardened materials, all blades are 5in. long and have regular teeth. These blades are most commonly used by jewelers. Use with hand held frames only.

    Choose the blade that best suits the thickness or gauge of the material being cut. The blue and white chart has recommendations. The ideal ratio is 3 teeth on the materials at any time. A B & S gauge can measure the thickness if you are not sure.

    SKUs: 36-475 #3/0 – 36-476 #2/0 – 36-478 #0 – 36-479 #1 – 36-480 #2 – 36-481 #3 – 36-482 #4

  • Jewelersblades 400x301 - 144-Pack Jewelers Metal Piercing Saw Blades  144-Pack Jewelers Metal Piercing Saw Blades - jeweler-s-blades-and-saws, jewelers-saw-jeweler-saws, coping-jewelers-mini-hack-saw-frames-and-blades

    144-Pack Jewelers Metal Piercing Saw Blades

    $39.95

    Bulk packaged 144 of same spec blades. 5in. long premium quality Metal Piercing Jewelers Saw Blades have extremely fine teeth. Made of hardened and tempered steel for sawing metal and other hardened materials, all blades are 5in. long and have regular teeth. These blades are most commonly used by jewelers. Use with hand held frames only.

    Choose the blade that best suits the thickness or gauge of the material being cut. The blue and white chart has recommendations. The ideal ratio is 3 teeth on the materials at any time. A B & S gauge can measure the thickness if you are not sure.

    SKUs: 36-475GR#3/0 – 36-476GR #2/0 – 36-478GR #0 – 36-479GR #1 – 36-480GR #2 – 36-481GR #3 – 36-482GR #4

  • Saw Blade Lubricant Stick

    Saw Blade Lubricant Stick – AC70010

    $7.62

    8″ long x 1″ diameter. Prolongs blade life and produces smoother and quicker cuts. Specially compounded to keep metal, plastic, and wood cutting blades from clogging with wood chips or pitch. Use on all power and hand held cutting tools including band, scroll, circular, hack and jewelers saw blades. View or download SDS/MSDS sheet on this product.

     

Orders will not be processed between Dec. 12-14 due to Inventory. Monday Dec. 17 order processing will resume. We apologize for the inconvenience. Dismiss

string(4) "grid"